P1142

(Temporary) Single coated straight microperforated transparent PE film

  • Carrier: Straight microperforated transparent PE film 55 g/sqm
  • Adhesive: Solvent acrylic 35 g/sqm
  • Liner: White paper one side siliconized 65 g/sqm
En savoir plus
→ Dimensions
  • Roll width upon request
  • Maximum width 1000mm
→ Uses
  • Adhesive tape for standard ECG electrodes
  • Adhesive tape for plasters or surgical tapes
→ Benefits
  • Good adhesion
  • Breathable
  • Hydrophobic
  • Tearable by hand
→ Storage and shelf life
  • Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing.
  • Product as supplied in original packaging will maintain stated properties during one year before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably in between 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.

 

Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented here above.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application or processing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-SAN-00139-01
Creation date : 2021/09/23

Check out other similar products

P1125

Single coated beige color PE film

  • Carrier: Beige color PE film 55 g/sqm
  • Adhesive: Solvent free acrylic 30 g/sqm
  • Liner: White paper one side siliconized 62 g/sqm
  • Beige color PE film backing
  • Resistant
  • Eco-friendly adhesive
Technical sheet →

P1103

Single coated skin color PVC film

  • Carrier: Skin color PVC film 114 g/sqm
  • Adhesive: Water-based Acrylic 42 g/sqm
  • Liner: White paper one side siliconized 62 g/sqm
  • Rigid beige PVC carrier
  • Very resistant
  • Waterproof
Technical sheet →

P1139

Single coated transparent PE film

  • Carrier: Transparent PE film 55 g/sqm
  • Adhesive: Solvent acrylic 35 g/sqm
  • Liner: White paper, one side siliconized 62 g/sqm
  • Good adhesion on skin or on various substrate materials
  • Transparent
  • Hydrophobic
Technical sheet →

Do you think P1142 could fit with your application ? Get in touch with your Adhex correspondent now.

Contact us →