P1157

Single coated transparent PU film

  • Applicator: White paper one side siliconized 121 g/sqm
  • Carrier: Transparent PU film 25 g/sqm
  • Adhesive: Solvent acrylic 20 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
En savoir plus
Dimensions
  • Roll width upon request
  • Maximum width available 1550mm
Uses
  • Adhesive tape for plasters & superficial wound protection
Benefits
  • Standard adhesion
  • Long lasting skin adhesion
  • Very conformable
  • Transparent
  • Breathable
  • Waterproof
  • Bacteria proof
Storage and shelf life
  • Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing.
  • Product as supplied in original packaging will maintain stated properties during two years before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably in between 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-SAN-00140-01
Creation date : 2021/09/28

Check out other similar products

P1159-1

Single coated DMF-free transparent PU film

  • Applicator: White paper one side siliconized 121g/sqm
  • Carrier: Transparent PU film 25 g/sqm
  • Adhesive: Solvent acrylic 25 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
  • Highly conformable and breathable
  • Easy to convert or die-cut due to applicator thickness
  • DMF-free adhesive PU film

P1177

Single coated transparent PU film

  • Carrier: Transparent PU film 28 g/sqm
  • Adhesive: Solvent free acrylic 30 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
  • Very conformable and breathable
  • Waterproof and bacteria proof
  • Eco-friendly adhesive

P1097

Single coated transparent PU film

  • Carrier: Transparent PU film 28 g/sqm
  • Adhesive: Solvent free acrylic 33 g/sqm
  • Liner: White paper one side siliconized 62 g/sqm
  • Highly conformable
  • Breathable
  • Eco-friendly adhesive

Do you think P1157 could fit with your application ? Get in touch with your Adhex correspondent now.