P933 (Temporary)

Single coated white PE foam

  • Carrier: White PE foam 1mm (55kg/m3)
  • Adhesive: Solvent free acrylic 50g/sqm
  • Liner: White paper, one side siliconized 80g/sqm
En savoir plus
→ Dimensions
  • Roll width upon request
  • Maximum width 1450mm
→ Uses
  • Adhesive foam for ECG / Stress test electrodes
→ Benefits
  • Higher skin adhesion
  • Long lasting skin adhesion
  • Conformable
  • Hydrophobic carrier
  • Eco friendly
→ Storage and shelf life
  • Avoid storing the product outside for any significant period of time where itcould be exposed to harmful influences such as humidity ordirect sunlight.This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing. Product as supplied in original packaging will maintain stated propertiesduring one year before any subsequent transformation / usage /converting, when stored at ambient temperature, preferably in between15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.
  • Adhesion values and related specifications are set based on initial lab and production trials. They should be regarded as provisional and mighttypically / chemical characteristics and behaviour of pressure sensitive adhesives, variation of physical values from one batch to another, or even within the same batch, are not unusual and cannot be regarded as a defect. Where necessary, based on values observed in the 5 first batches, AdhexLab will propose an adjustment of the specifications, including mean value,min/max limits and/or broadness of range.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-SAN-00359-01
Creation date : 2024/12/17

Check out other similar products

P916

Single coated white PE foam

  • Carrier: White PE foam 1 mm (55 kg/m3)
  • Adhesive: Solvent acrylic 35 g/sqm
  • Liner: White paper, one side siliconized 80 g/sqm
  • Higher skin adhesion
  • Long lasting skin adhesion
  • Suitable for ECG electrodes
Technical sheet →

P918

Single coated white PE foam

  • Carrier: White PE foam 1 mm
  • Adhesive: Solvent free acrylic 40 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
  • Medium skin adhesion
  • Eco-friendly adhesive
  • Suitable for neutral electrodes
  • Good combination with P828 hydrogel
Technical sheet →

P919

Single coated white PE foam

  • Carrier: White PE foam 1 mm
  • Adhesive: Solvent free acrylic 50 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
  • High skin adhesion
  • Good combination with conductive hydrogel P828
  • Eco-friendly adhesive
Technical sheet →

Do you think P933 could fit with your application ? Get in touch with your Adhex correspondent now.

Contact us →