(Temporary) Single coated beige TPU non-woven

  • Carrier: Beige TPU non woven 100g/sqm
  • Adhesive: solvant acrylic adhesive 50g/sqm
  • Liner: white paper one side siliconized 100g/sqm
En savoir plus
  • Roll width upon request
  • Maximum width 1500mm
  • Wound care dressing manufacturing
  • Wearable devices adhesive fixation
  • Transdermal patch cover tape
  • Good skin adhesion
  • High cutaneous tolerance
  • Conformable and elastic
  • Highly breathable
  • Easy to die-cut
Stockage et durée de conservation
  • Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing.
  • Product as supplied in original packaging will maintain stated properties during one year before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably in between 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.
  • Adhesion values and related specifications are set based on initial lab and production trials. They should be regarded as provisional and might typically / chemical characteristics and behaviour of pressure sensitive adhesives, variation of physical values from one batch to another, or even within the same batch, are not unusual and cannot be regarded as a defect. Where necessary, based on values observed in the 5 first batches, Adhex Lab will propose an adjustment of the specifications, including mean value, min/max limits and/or broadness of range.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-SAN-00178-01
Creation date : 2023/04/27


Single coated white TPU Meltblown

  • Carrier: white Meltblown thermoplastic polyurethane 60g/sqm
  • Adhesive: solvant acrylic adhesive 50g/sqm
  • Liner: white paper one side siliconized 62g/sqm
  • High cutaneous tolerance
  • Conformable and elastic TPU material
  • Highly breathable
  • Easy to die-cut


Single coated beige TPU non-woven with laminated PU film

  • Carrier: Beige TPU non woven 45g/sqm laminated with PU film 30g/sqm
  • Adhesive: solvant acrylic adhesive 25g/sqm
  • Liner: white paper one side siliconized 100g/sqm
  • High cutaneous tolerance
  • Conformable and elastic
  • PU layer guarantees product waterproofness
  • Breathable

Do you think P1505 could fit with your application ? Get in touch with your Adhex correspondent now.