P1019

Black adhesive PP Non-woven

  • Carrier: Black PP Non-woven
  • Adhesive: Solvent based acrylic
  • Liner: Brown non-adherent polyethylene coated paper
En savoir plus
Dimensions
  • Various lengths and width adapted according to needs
Usages
  • Protection of metal or plastic parts which can suffer damages due to assembly and disassembly stages of the vehicle during the manufacturing process.
  • Anti-scratch or abrasion-resistant purposes.
  • Acoustic ability. Good resistance against various noises.
Bénéfices
  • Adapted to low energy or painted steel plate
  • Very good resistance and conformability
  • Lint-free material with excellent resistance to scratching
  • Excellent instant adhesion
  • Excellent resistance to aging
  • Easy application on distorted surfaces or edgefolding
  • Acoustic improvement
  • Good performance in high temperature: 120°C peak
Stockage et durée de conservation
  • 6 months from the date of receipt by the customer when the product is stored in his original packaging at 20°C (±5°C) and a relative humidity of approximately 50% (±15%). The products must be protected from temperatures above 40°C, UV light and relative humidity above 80%.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-AUT-00069-03
Creation date : 2021/09/10

Découvrez d'autres produits similaires

P228

Black adhesive felt

  • Carrier: Black Polyester felt
  • Adhesive: Acrylic hot melt
  • Liner: Brown kraft paper
  • Compatible with low energy surfaces or greasy surfaces
  • Reducing noises such as friction, vibrations or shocks between components inside the vehicle

P402

Transparent glossy adhesive PVC film

  • Carrier: Transparent glossy calendered PVC film
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 2 sided polyethylene coated paper
  • Product conformability, printability and excellent UV-resistance ensure a sustainable utilization outside the vehicle.
  • Excellent protection of friction, abrasion and scratch sensitive areas.

P630

Zinc adhesive special grease surface

  • Carrier: Zinc sheet Z1 purity 99,995%
  • Adhesive: Water based acrylic double-sided on non-woven backing
  • Liner: Brown two sided non-stick paper
  • Special to bonding on grease surface
  • Sacrificial anode (consumable anode) in the case of cathodic protection of metals

P631

Zinc adhesive

  • Carrier: Zinc sheet Z1 purity 99,995%
  • Adhesive: Solvent based acrylics
  • Protective liner: White non-stick paper
  • Special to bonding on clean surface
  • Sacrificial anode (consumable anode) in the case of cathodic protection of metals

P1009

Grey adhesive PP Non-woven

  • Carrier: Grey PP non-woven
  • Adhesive: Water based acrylic
  • Liner: Brown non-adherent polyethylene coated paper
  • Excellent adhesion on low surface energy
  • Very good resistant against friction and scratch
  • Limits a friction noise
  • Printable

Vous pensez que ce produit pourrait convenir à votre application ? Prenez contact avec votre correspondant Adhex dès maintenant

Grâce à notre expérience et à nos compétences en matière de développement, nous élaborons des solutions adaptées aux besoins de nos clients en répondant à toutes les exigences de l'industrie automobile.