P934

(Temporary) Single coated white PE foam

  • Carrier: White PE foam 1 mm thickness
  • Adhesive: solvant acrylic adhesive 40g/sqm
  • Liner: White paper one side siliconized 80g/sqm
En savoir plus
→ Dimensions
  • Roll width upon request
  • Maximum width 1350mm
→ Usages
  • Ostomy bags fixation
  • Medical device assembly
→ Bénéfices
  • Conformable
  • Easy to die-cut
  • Ultrasonic weldable
  • Good adhesion on ostomy flanges
→ Stockage et durée de conservation
  • Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing.
  • Product as supplied in original packaging will maintain stated properties during one year before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably in between 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.
  • Adhesion values and related specifications are set based on initial lab and production trials. They should be regarded as provisional and might typically / chemical characteristics and behaviour of pressure sensitive adhesives, variation of physical values from one batch to another, or even within the same batch, are not unusual and cannot be regarded as a defect. Where necessary, based on values observed in the 5 first batches, Adhex Lab will propose an adjustment of the specifications, including mean value, min/max limits and/or broadness of range.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-SAN-00181-01
Creation date : 2023/05/22

Check out other similar products

P450NM

Double coated white PP film

  • Carrier: White PP film 35 g/sqm
  • Adhesive (open side): Solvent acrylic 30 g/sqm
  • Adhesive (closed side): Solvent acrylic 37 g/sqm
  • Liner: White paper, PE silicon coated 2 sides 145 g/sqm
 
Fiche technique →

P574

Single coated white PET non-woven EVA powdered

  • Carrier: White PET non-woven EVA powdered 85 g/sqm
  • Adhesive: Solvent acrylic 40 g/sqm
  • Liner: White paper two sides siliconized 122 g/sqm
  • EVA powdered non-woven
  • Easy to die-cut due to the liner thickness
  • Heat weldable
  • High resistance to stretching
Fiche technique →

P7681

Double coated tape transparent PET film

  • Carrier: Transparent PET film 17 g/sqm
  • Adhesive (open side): Solvent free acrylic 45 g/sqm
  • Adhesive (closed side): Solvent free acrylic 45 g/sqm
  • Liner: White paper, 2 sides siliconized coated 80 g/sqm
  • Good adhesion on PE
  • Easy to die-cut
Fiche technique →

Do you think P934 could fit with your application ? Get in touch with your Adhex correspondent now.

Contactez-nous →