P934

(Temporary) Single coated white PE foam

  • Carrier: White PE foam 1 mm thickness
  • Adhesive: solvant acrylic adhesive 40g/sqm
  • Liner: White paper one side siliconized 80g/sqm
En savoir plus
Dimensions
  • Roll width upon request
  • Maximum width 1350mm
Uses
  • Ostomy bags fixation
  • Medical device assembly
Benefits
  • Conformable
  • Easy to die-cut
  • Ultrasonic weldable
  • Good adhesion on ostomy flanges
Storage and shelf life
  • Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing.
  • Product as supplied in original packaging will maintain stated properties during one year before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably in between 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.
  • Adhesion values and related specifications are set based on initial lab and production trials. They should be regarded as provisional and might typically / chemical characteristics and behaviour of pressure sensitive adhesives, variation of physical values from one batch to another, or even within the same batch, are not unusual and cannot be regarded as a defect. Where necessary, based on values observed in the 5 first batches, Adhex Lab will propose an adjustment of the specifications, including mean value, min/max limits and/or broadness of range.
Veuillez noter que les tests sont effectués dans des conditions standardisées et, par conséquent, les résultats obtenus pour une application spécifique peuvent différer des résultats présentés ci-dessus.
ADHEX TECHNOLOGIES ne garantit la conformité de ses produits aux spécifications figurant sur la fiche technique qu'au moment de leur livraison.
ADHEX TECHNOLOGIES n'offre aucune autre garantie et, en particulier, ne garantit pas les performances du produit ou sa sécurité lorsqu'il est utilisé en combinaison avec d'autres matériaux.
ADHEX TECHNOLOGIES ne garantit pas les produits pour un usage particulier, ni ne garantit leur compatibilité ou leur adéquation à quelque application industrielle ou procédé de transformation que ce soit.
Les clients sont invités à se référer aux « Conditions Générales de Vente et de Garantie » disponibles sur www.adhex.com
Reference : FT-SAN-00181-01
Creation date : 2023/05/22

Check out other similar products

P450NM

Double coated white PP film

  • Carrier: White PP film 35 g/sqm
  • Adhesive (open side): Solvent acrylic 30 g/sqm
  • Adhesive (closed side): Solvent acrylic 37 g/sqm
  • Liner: White paper, PE silicon coated 2 sides 145 g/sqm
 

P574

Single coated white PET non-woven EVA powdered

  • Carrier: White PET non-woven EVA powdered 85 g/sqm
  • Adhesive: Solvent acrylic 40 g/sqm
  • Liner: White paper two sides siliconized 122 g/sqm
  • EVA powdered non-woven
  • Easy to die-cut due to the liner thickness
  • Heat weldable
  • High resistance to stretching

P7681

Double coated tape transparent PET film

  • Carrier: Transparent PET film 17 g/sqm
  • Adhesive (open side): Solvent free acrylic 45 g/sqm
  • Adhesive (closed side): Solvent free acrylic 45 g/sqm
  • Liner: White paper, 2 sides siliconized coated 80 g/sqm
  • Good adhesion on PE
  • Easy to die-cut

Do you think P934 could fit with your application ? Get in touch with your Adhex correspondent now.