P551

Double sided non-woven adhesive tape

  • Carrier: Non-woven
  • Adhesive (open side): Water based acrylic
  • Adhesive (closed side): Water based acrylic
  • Liner: Brown anti-adherent paper
En savoir plus
→ Dimensions
  • Various lengths and widths adapted according to needs
→ Uses
  • For permanent maintenance of plastic element with low surface energy (LSE) or with an irregular surface appearance (textured, rough, porous): foam seals, adhesive foam block, parts covering the hole, acoustic pads…
→ Benefits
  • Very high tack : on every type of surfaces and materials
  • Excellent adhesion on low energy surfaces plastic (PE,PP)
  • Very high adhesion on irregular surface (open cells foam, non-woven, fiber)
  • Good adhesion on polluted surfaces (oil, grease)
  • Good temperature resistance : from -40°C to 120°C
→ Storage and shelf life
  • 6 months from the date of receipt by the customer when the product is stored in his original packaging at 20°C (±5°C) and a relative humidity of approximately 50% (±15%). The products must be protected from temperatures above 40°C, UV light and relative humidity above 80%.

 

Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-AUT-00095-03
Creation date : 2021/09/16

Discover the other products of our range

Adhesive fabric foamed for door trim

  • Carrier: Fabric polyurethane foamed
  • Adhesive: Double-sided non-woven adhesive tape
  • Liner: Brown anti-adherent paper
  • Selection of the fabric (thickness and aspect) requested by the customer
  • Custom adhesive shape definition
Technical sheet →

Adhesive TPU foamed for door trim

  • Carrier: TPU polyurethane foamed
  • Adhesive: Double-sided non-woven adhesive tape
  • Liner: Brown anti-adherent paper
  • Selection of the TPU (thickness and aspect) requested by the customer
  • Custom adhesive shape definition
Technical sheet →

P068

Acrylic adhesive transfer

  • Adhesive: Transparent hotmelt acrylic
  • Liner: White anti-adherent paper
  • Excellent cohesion of the material allows good workability during the cutting process.
Technical sheet →

Do you think this product could fit with your application? Get in touch with your Adhex correspondent now

Thanks to our experience and development skills, we develop solutions adapted to the needs of our customers and meeting all the requirements of the automotive industry.
Contact us →