XL Care Dermic Tape
Needle securement - Catheter and gauze fixation

- Carrier: White PET-Cellulose Non-Woven 34 g/sqm
- Adhesive: Water-based acrylic 25 g/sqm
- Liner: White paper, two sides siliconized paper 122 g/sqm
En savoir plus
→
Dimensions
- 12.5 mm x 148 mm in sheets of two strips
- 25 mm x 148 mm in sheets of two strips
- 12.5 mm x 100 mm in sheets of two strips
- 12.5 mm x 100 mm in sheets of three strips
→
Uses
- Catheter and tube fixation
- Gauze fixation
- Component of nursing care sets and hemodialysis sets
→
Benefits
- Skin friendly adhesive to reduce pain at removal
- Microporous white stiff non-woven to ensure air and water vapor permeability
- Individually pre-cut presentation to be applied easily
- CE Marking available
- Suitable for sterilization final validation to be performed by the cusotmer
→
Storage and shelf life
- Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing.
- Product as supplied in original packaging will maintain stated properties during 36 months before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably in between 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.
Check out other similar products

XL Care Dermic Film IV
Intra venous catheter fixation with integrated non-woven strips
PU Dressing:
- Applicator: Printed white paper one side siliconized 121 g/sqm
- Carrier: Transparent PU film 25 g/sqm
- Adhesive: Solvent acrylic 25 g/sqm
- Liner: Printed paper one side siliconized 81 g/sqm
- Transparent polyurethane film for puncture site monitoring
- Non-woven reinforcement for extra strength
- Integrated non-woven strips to improve catheter securement

XL Care Dermic Film
Primary device securement
- Applicator: White paper one side siliconized 121 g/sqm
- Carrier: Transparent PU Film 25 g/sqm
- Adhesive: Solvent acrylic 25 g/sqm
- Liner: Printed paper one side siliconized 81 g/sqm
- Transparent adhesive dressing
- Breathable with good skin adhesion
- Application tips printed on the paper frame

P1227
Single coated white PET-Cellulose Non-Woven
- Carrier: White PET-Cellulose Non-Woven 34 g/sqm
- Adhesive: Water-based acrylic 25 g/sqm
- Liner: White paper, two sides siliconized paper 122 g/sqm
- Breathable
- Microporous aspect