Clear semi-adhesive label reprintable at the production line (textured surface)

  • Protective liner: Translucent white polypropylene film
  • Adhesive: Solvent based acrylic (P0621 transparent)
  • Carrier: Transparent polyester film
En savoir plus
→ Dimensions
  • Various lengths and widths adapted according to needs
→ Uses
  • Labels applied on smooth and slightly grained varnish
  • Bonding on metallic or low surface energy surfaces
  • Pre-printed labels with line-edge repeat printing (eg. type placard, car manufacturer plate, VIN)
→ Benefits
  • Excellent adhesion on high energy surfaces
  • Excellent resistance against ageing and U.V
  • Good holding against chemical exposure
  • Good holding against heating
  • Cohesive adhesive
→ Storage and shelf life
  • 6 months from the date of receipt by the customer when the product is stored in his original packaging at 20°C (±5°C) and a relative humidity of approximately 50% (±15%). The products must be protected from temperatures above 40°C, UV light and relative humidity above 80%.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-AUT-00067-03
Creation date : 2021/09/16

Check out other similar products

White semi-adhesive label reprintable at the production line (textured surface)

  • Protective liner: Translucent white polypropylene film
  • Adhesive: Solvent based acrylic (P0601 white color)
  • Carrier: Transparent polyester film
  • Bonding on smooth or slightly grained varnish
  • Excellent adhesion on painted sheet plate
  • Excellent printability
  • Excellent protection of ink after assembly on vehicle
Technical sheet →

White semi-adhesive label reprintable at the production line (smooth surface)

  • Protective liner: Translucent white polypropylene film
  • Adhesive: Solvent based acrylic (P0602 white color)
  • Carrier: Transparent polyester film
  • Bonding on smooth varnish
  • Excellent adhesion on painted sheet plate
  • Excellent printability
  • Excellent protection of ink after assembly on vehicle
Technical sheet →

Clear semi-adhesive label reprintable at the production line (LSE)

  • Protective liner: Translucent white polypropylene film
  • Adhesive: Solvent based acrylic (P063 transparent)
  • Carrier: Transparent polyester film
  • Clear adhesive transfer special PP
  • Bonding on smooth or slightly grained varnish
  • Excellent printability
  • Excellent protection of ink after assembly on vehicle
Technical sheet →

Do you think this product could fit with your application? Get in touch with your Adhex correspondent now

Thanks to our experience and development skills, we develop solutions adapted to the needs of our customers and meeting all the requirements of the automotive industry.
Contact us →