P421

Black adhesive PVC film high temperature

  • Carrier: Black fine textured PVC film
  • Adhesive: Solvent based acrylic
  • Liner: White non-stick paper
En savoir plus
→ Dimensions
  • Various lengths and widths adapted according to needs
→ Uses
  • Hole covering, die-cut parts
  • Water, air and dust tightness in all areas of the vehicle (interior and exterior)
  • Application over and under paint
  • Possibility of stick the obturator/cover hole before entering the paint baking oven (maximum temperature resistance 190°C)
→ Benefits
  • Excellent thermal resistance
  • Excellent adhesion on cataphoresis sheet, paint or varnish
  • Excellent handling properties (flexible, conformable and resistant)
  • Excellent dimensional stability
  • Excellent chemical resistance
  • Excellent water resistance
  • Excellent UV resistance
  • Good abrasion and scratch resistance
→ Storage and shelf life
  • 6 months from the date of receipt by the customer when the product is stored in his original packaging at 20°C (±5°C) and a relative humidity of approximately 50% (±15%). The products must be protected from temperatures above 40°C, UV light and relative humidity above 80%.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-AUT-00086-04
Creation date : 2023/10/09

Discover other products of our range

P408

Black textured adhesive PVC film

  • Carrier: Black textured PVC film
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 1 sided polyethylene coated paper
  • Thick (370µm) and resistant product of a very easy use
Technical sheet →

P409

Black textured adhesive acoustic PVC film

  • Carrier: Black textured PVC film
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 1 sided polyethylene coated paper
  • Thick (860µm), acoustic insulation and very resistant product of a very easy use
Technical sheet →

P412

Thin black adhesive PVC film

  • Carrier: Black finely textured PVC film (90µm)
  • Adhesive: Solvent based acrylic
  • Liner: White non-stick paper
  • Soft black adhesive film for car’s interior or exterior (without UV)
Technical sheet →

P423

Adhesive PET foil

  • Carrier: Transparent PET foil (75µm)
  • Adhesive: Solvent based acrylic
  • Liner: White non-stick paper
  • Application on cataphoresis under paint or directly on painted subtract
  • Compatible with paints and varnishes applied at high temperature
Technical sheet →

P622

Adhesive aluminum foil

  • Surface layer: PET film
  • Carrier: Smooth annealed aluminum foil (38µm)
  • Adhesive: Solvent based acrylic
  • Liner: White non-stick paper
  • Application on cataphoresis under paint
  • Compatible with paints and varnishes applied at high temperature
  • Conducts electricity, e.g. for antenna conductors
Technical sheet →

Do you think this product could fit with your application? Get in touch with your Adhex correspondent now

Thanks to our experience and development skills, we develop solutions adapted to the needs of our customers and meeting all the requirements of the automotive industry.
Contact us →