P719

Anthracite adhesive polyethylene foam 2mm

  • Carrier: Anthracite polyethylene foam
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 1 sided polyethylene coated paper
En savoir plus
→ Dimensions
  • Various lengths and widths adapted according to needs
→ Uses
  • Hole covering and protection parts
  • Air/water/dust/noise proofing
  • Absorbing light shocks such as electric harness noises
  • This product has been conceived to fulfill precise needs on the automotive market: small or medium-sized functional parts (adhesive pads of many sizes)
→ Benefits
  • Excellent conformability​
  • High adhesion on low energy plastics (PE & PP)​
  • High adhesion on varnished painted steel ​
  • High adhesion on irregular surfaces​
  • Resistance to temperature: -20°C to 100°C ​
  • Excellent aging resistance​
  • Resistant to water​
  • Fireproof
→ Storage and shelf life
  • 6 months from the date of receipt by the customer when the product is stored in his original packaging at 20°C (±5°C) and a relative humidity of approximately 50% (±15%). The products must be protected from temperatures above 40°C, UV light and relative humidity above 80%.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-AUT-00099-03
Creation date : 2022/04/14

Discover the other products of our range

P228

Black adhesive felt

  • Carrier: Black Polyester felt
  • Adhesive: Acrylic hot melt
  • Liner: Brown kraft paper
  • Compatible with low energy surfaces or greasy surfaces
  • Reducing noises such as friction, vibrations or shocks between components inside the vehicle
Technical sheet →

P409

Black textured adhesive acoustic PVC film

  • Carrier: Black textured PVC film
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 1 sided polyethylene coated paper
  • Thick (860µm), acoustic insulation and very resistant product of a very easy use
Technical sheet →

P428

Transparent glossy adhesive PU film

  • Carrier: Transparent glossy calendered PU film
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 2 sided polyethylene coated paper
  • Product conformability, excellent printability 
  • Excellent protection of friction, abrasion and scratch sensitive areas.
Technical sheet →

P724

Anthracite adhesive polyethylene foam 2mm

  • Carrier: Anthracite polyethylene foam
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 1 sided polyethylene coated paper
Technical sheet →

P1009

Grey adhesive PP Non-woven

  • Carrier: Grey PP non-woven
  • Adhesive: Water based acrylic
  • Liner: Brown non-adherent polyethylene coated paper
  • Excellent adhesion on low surface energy
  • Very good resistant against friction and scratch
  • Limits a friction noise
  • Printable
Technical sheet →

Do you think this product could fit with your application? Get in touch with your Adhex correspondent now

Thanks to our experience and development skills, we develop solutions adapted to the needs of our customers and meeting all the requirements of the automotive industry.
Contact us →