P1228-1

Single coated white varnished PET-Cellulose non-woven

  • Carrier: White varnished PET cellulose non-woven 34 g/sqm
  • Adhesive: Solvent free acrylic 25 g/sqm
  • Liner: White paper one side siliconized 81 g/sqm
En savoir plus
→ Dimensions
  • Roll width upon request
  • Maximum width 1050mm
→ Uses
  • Adhesive tape for plasters
→ Benefits
  • Good adhesion
  • Can be used as self wound tape without liner (upon request)
  • Breathable
  • Eco-friendly adhesive
→ Storage and shelf life
  • Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing.
  • Product as supplied in original packaging will maintain stated properties during one year before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably in between 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-SAN-00015-02
Creation date : 2021/09/30

Check out other similar products

P1003-1

Single coated white PET non-woven

  • Carrier: White PET non-woven 59 g/sqm
  • Adhesive: Solvent acrylic 60 g/sqm
  • Liner : White paper one side siliconized 62 g/sqm
  • High cutaneous tolerance
  • Rigid non-woven carrier
  • Easy to die-cut thanks to liner thickness
Technical sheet →

P1035

Single coated skin color PP non-woven

  • Carrier: Beige color PP non-woven 40 g/sqm
  • Adhesive: Solvent acrylic 50 g/sqm
  • Liner: White paper, one side siliconized 65 g/sqm
  • Good adhesion
  • High cutaneous tolerance
  • Beige hydrophobic carrier
  • Easy to die-cut
Technical sheet →

P1227

Single coated white PET-Cellulose Non-Woven

  • Carrier: White PET-Cellulose Non-Woven 34 g/sqm
  • Adhesive: Water-based acrylic 25 g/sqm
  • Liner: White paper, two sides siliconized paper 122 g/sqm
  • Breathable
  • Microporous aspect
Technical sheet →

Do you think P1228-1 could fit with your application ? Get in touch with your Adhex correspondent now.

Contact us →