P816

Single coated skin color PE foam

  • Carrier: Beige color PE foam 77 g/sqm
  • Adhesive: Solvent acrylic 50 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
En savoir plus
→ Dimensions
  • Rolls width upon request
  • Maximum width 355mm
→ Uses
  • Adhesive tape for plasters manufacturing
→ Benefits
  • Good skin adhesion
  • Resistant
  • Breathable
  • Visual staggered microperforation
→ Storage and shelf life
  • Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing.
  • Product as supplied in original packaging will maintain stated properties during two years before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably in between 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-SAN-00027-03
Creation date : 2021/09/30

Check out other similar products

P922

Single coated beige PE foam

  • Carrier: Beige color PE foam 77 g/sqm
  • Adhesive: Solvent free acrylic 50 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
  • Rigid beige PE foam
  • High cutaneous tolerance
  • Eco-friendly adhesive
Technical sheet →

P1501

Single coated white TPU Meltblown

  • Carrier: white Meltblown thermoplastic polyurethane 60g/sqm
  • Adhesive: solvant acrylic adhesive 50g/sqm
  • Liner: white paper one side siliconized 62g/sqm
  • High cutaneous tolerance
  • Conformable and elastic TPU material
  • Highly breathable
  • Easy to die-cut
Technical sheet →

P1125

Single coated beige color PE film

  • Carrier: Beige color PE film 55 g/sqm
  • Adhesive: Solvent free acrylic 30 g/sqm
  • Liner: White paper one side siliconized 62 g/sqm
  • Beige color PE film backing
  • Resistant
  • Eco-friendly adhesive
Technical sheet →

Do you think P816 could fit with your application ? Get in touch with your Adhex correspondent now.

Contact us →