P915

Single coated PE foam laminated with PET film

  • Carrier: PE foam laminated with PET film 93 g/sqm
  • Adhesive: Solvent free acrylic adhesive 50 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
En savoir plus
→ Dimensions
  • Roll width upon request
  • Maximum width 1500mm
→ Uses
  • Adhesive tape for plasters
  • Medical device assembly
→ Benefits
  • Occlusive carrier
  • Rigid carrier
  • Can be used as a backing material for various constructions and applications
  • Eco-friendly adhesive
→ Storage and shelf life
  • Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before.
  • Product as supplied in original packaging will maintain stated properties during two years before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably in between 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.

 

Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented here above.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application or processing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-SAN-00030-02
Creation date : 2021/10/05

Check out other similar products

P928

Double coated white PE/EVA foam

  • Carrier: White PE/EVA foam 92 g/sqm
  • Adhesive open side: Solvant acrylic 60 g/sqm
  • Liner: White paper two sides siliconized 80 g/sqm
  • Adhesive closed side: Solvant acrylic 60 g/sqm
  • High skin adhesion
  • Conformable
  • Easy to die-cut due to liner thickness
Technical sheet →

P7681

Double coated tape transparent PET film

  • Carrier: Transparent PET film 17 g/sqm
  • Adhesive (open side): Solvent free acrylic 45 g/sqm
  • Adhesive (closed side): Solvent free acrylic 45 g/sqm
  • Liner: White paper, 2 sides siliconized coated 80 g/sqm
  • Good adhesion on PE
  • Easy to die-cut
Technical sheet →

Do you think P915 could fit with your application ? Get in touch with your Adhex correspondent now.

Contact us →