P926

Single coated white PET non-woven

  • Carrier: White PET non-woven 50 g/sqm
  • Adhesive: Solvent acrylic 27 g/sqm
  • Liner: White paper one side siliconized 63 g/sqm
En savoir plus
→ Dimensions
  • Roll width upon request
  • Maximum width 1500mm
→ Uses
  • Adhesive tape for post-operative dressings
  • Adhesive tape for IV catheter (NW reinforcement)
  • Adhesive tape for Ostomy securement dressings
→ Benefits
  • Good adhesion
  • High cutaneous tolerance
  • Highly conformable
  • Breathable
→ Storage and shelf life
  • Avoid storing the product outside for any significant period of time where it could be exposed to harmful influences such as humidity or direct sunlight. This product should be transferred, in the original packaging, to the processing area at least 24 hours before processing.
  • Product as supplied in original packaging will maintain stated properties during one year before any subsequent transformation / usage / converting, when stored at ambient temperature, preferably in between 15°C (59°F) and 30°C (86°F) and in between 35% and 65% relative humidity.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-SAN-00082-02
Creation date : 2021/10/13

Check out other similar products

P049

Transfer tape

  • Liner 1: White paper one side siliconized 81 g/sqm
  • Adhesive: Solvent-free acrylic adhesive 50 g/sqm
  • Liner 2: Transparent PET film 51 g/sqm
  • Good bonding to PE foam
  • Eco-friendly adhesive
Technical sheet →

P570LL

Single coated white PET non-woven

  • Carrier: White PET non-woven 45 g/sqm
  • Adhesive: Solvent acrylic 35 g/sqm
  • Liner: White paper one side siliconized 81 g/sqm
  • Higher skin adhesion
  • Breathable
  • Soft touch and conformable backing
Technical sheet →

P574

Single coated white PET non-woven EVA powdered

  • Carrier: White PET non-woven EVA powdered 85 g/sqm
  • Adhesive: Solvent acrylic 40 g/sqm
  • Liner: White paper two sides siliconized 122 g/sqm
  • EVA powdered non-woven
  • Easy to die-cut due to the liner thickness
  • Heat weldable
  • High resistance to stretching
Technical sheet →

Do you think P926 could fit with your application ? Get in touch with your Adhex correspondent now.

Contact us →