Temporary car body and bumper protections

To protect the vehicle between the factory and the dealership, Adhex offers vehicle manufacturers a specific part composed of a foam and an adhesive that leaves no trace upon removal.

On the assembly line and then during logistics operations between the factory and the dealership, the new vehicle must be protected. Adhex has developed a range of adhesive solutions to protect freshly painted carbody and plastic parts such as bumpers. These temporary protections are intended to do their job for six months, before being easily removed in the dealership without leaving any trace. This is directly related to the core business of the Adhex Group. The adhesive used guarantees that the protective device will remain in perfect condition as well as its resistance to hazards during transport: neither the weather nor the shocks during transport by train, boat or truck can damage the protection. The protection device is based on a differentiated double-sided adhesive with one side dedicated to temporary use for painted or chromed elements or for raw elements, whether smooth or grained. These adhesives thus fixed on various surfaces (plastics, painted or varnished sheet metal, chrome-plated elements, whether flat or curved) enable a polyolefin foam to be held firmly in place, the composition and thickness of which are adapted to the needs of each vehicle manufacturer. A simple pressure on the protection is enough to put it in place.

Our range of temporary carbody and bumper protections

P777

Double sided adhesive for temporary paint protection

  • Carrier: Transparent PET film
  • Open side adhesive: Permanent solvent based acrylic
  • Closed side adhesive (on the liner): Removable solvent based acrylic
  • Liner: White anti-adhesive paper
  • Temporary adhesion on painted metal, painted and varnished plastic and chrome elements
  • Vehicle exterior application
  • No marks or traces when removed after 6 months

P778

Double sided adhesive for temporary plastic part protection

  • Carrier: Transparent PET film
  • Open side adhesive: Permanent solvent based rubber
  • Closed side adhesive (on the liner): Removable solvent based acrylic
  • Liner: Brown anti-adhesive paper
  • Temporary adhesion on unfinished plastic smooth or textured
  • Vehicle exterior application
  • No marks or traces when removed after 6 months

Protection Foam on unpainted bumper & door trim

  • Carrier: Grey PE foam
  • Adhesive: Removable solvent based acrylic
  • Liner: Brown anti-adherent paper
  • Protective foam applied to unpainted bumpers
  • Temporary adhesion on unfinished plastic smooth or textured
  • No marks or traces when removed after 6 months

Protection Foam on painted bumper & painted steel

  • Carrier: White PE foam
  • Adhesive: Removable solvent based acrylic
  • Liner: White anti-adherent paper
  • Protective foam applied to carbody, painted bumpers, chromed trim
  • Temporary adhesion on varnish and chrome
  • No marks or traces when removed after 6 months

We develop other surface protection solutions, why not yours ?

Thanks to our experience and development skills, we develop soltuions adapted to the needs of our customers and meeting all the requirements of the automotive sector.

Discover other applications of the adhesive protection of the interior and exterior surfaces segment