P630

Zinc adhesive special grease surface

  • Carrier: Zinc sheet Z1 purity 99,995%
  • Adhesive: Water based acrylic double-sided on non-woven backing
  • Liner: Brown two sided non-stick paper
En savoir plus
Dimensions
  • Various lengths and widths adapted according to needs
Uses
  • Functional part for the automotive industry: for anti-corrosion protection in automotive industry, spacers between metal surfaces, cathodic protection of metals
  • Application on grease surface or clean surface
Benefits
  • Good resistance to high temperatures: 195°C
  • Very pure Zinc guaranteed
  • Usable on any type of surfaces: untreated steel, treated steel (cataphoresis, primer, paint, lacquer), metal alloys.
  • Excellent adhesion on oily or greasy surfaces
  • Excellent adhesion on PP
  • Excellent adhesion on plastic surfaces (ABS, PC, PA, PVC, PET, Noryl)
Storage and shelf life
  • 6 months from the date of receipt by the customer when the product is stored in his original packaging at 20°C (±5°C) and a relative humidity of approximately 50% (±15%). The products must be protected from temperatures above 40°C, UV light and relative humidity above 80%.
Please note that tests are conducted under standardized conditions and, as a consequence, the results obtained for a specific application may differ from the results presented hereabove.
ADHEX TECHNOLOGIES only guarantees the conformity of its products with the specifications shown on the technical datasheet, at the time of their delivery.
ADHEX TECHNOLOGIES offers no other guarantee and, in particular, does not guarantee the performance of the product or its safety when used in combination with other materials.
ADHEX TECHNOLOGIES does not guarantee products in respect of a particular usage, nor does it guarantee their compatibility with or appropriateness for any industrial application orprocessing method whatsoever.
Customers are advised to refer to the “General Conditions of Sales and Warranty” which can be found on www.adhex.com
Reference : FT-AUT-00142-02
Creation date : 2021/09/16

Discover other products of protective die-cut adhesive

P402

Transparent glossy adhesive PVC film

  • Carrier: Transparent glossy calendered PVC film
  • Adhesive: Solvent based acrylic
  • Liner: Anti-adherent 2 sided polyethylene coated paper
  • Product conformability, printability and excellent UV-resistance ensure a sustainable utilization outside the vehicle.
  • Excellent protection of friction, abrasion and scratch sensitive areas.

P228

Black adhesive felt

  • Carrier: Black Polyester felt
  • Adhesive: Acrylic hot melt
  • Liner: Brown kraft paper
  • Compatible with low energy surfaces or greasy surfaces
  • Reducing noises such as friction, vibrations or shocks between components inside the vehicle

P631

Zinc adhesive

  • Carrier: Zinc sheet Z1 purity 99,995%
  • Adhesive: Solvent based acrylic
  • Liner: White non-stick paper
  • Special to bonding on clean surface
  • Sacrificial anode (consumable anode) in the case of cathodic protection of metals

P1009

Grey adhesive PP Non-woven

  • Carrier: Grey PP non-woven
  • Adhesive: Water based acrylic
  • Liner: Brown non-adherent polyethylene coated paper
  • Excellent adhesion on low surface energy
  • Very good resistant against friction and scratch
  • Limits a friction noise
  • Printable

P1019

Black adhesive PP Non-woven

  • Carrier: Black PP Non-woven
  • Adhesive: Solvent based acrylic
  • Liner: Brown non-adherent polyethylene coated paper
  • Applicable on low surface energy and painted steel plate
  • Very good resistant against friction and scratch
  • Limits a friction noise

Do you think this product could fit with your application? Get in touch with your Adhex correspondent now

Thanks to our experience and development skills, we develop solutions adapted to the needs of our customers and meeting all the requirements of the automotive industry.